OPEXSTUDIO
Workstream 02 of 03

Implement and verify critical controls

Plan, Do, Check and Act form a cycle, with people asking, reading back, pausing and learning throughout.
The work and learning cycle

Define controls, implement them, compare actual evidence with requirements and improve the conditions. Changed conditions require reassessment before restart. AI-generated conceptual illustration; not a verified installation or equipment-specific instruction.

View full-size visual ↗

A protocol organizes work. A critical control must actually perform its protective function. Learn to connect the two and respond when evidence is missing.

Apply the system to the work

Explore the Critical 8

Choose the hazard relevant to your discussion. Each guide connects engineered protection, critical-control verification and Human Performance.

  1. Critical 8 / 01

    Mobile equipment

    Learn the mobile equipment control system through protective functions, verification questions and a changed-condition practice scenario.

    Explore the hazard →
  2. Critical 8 / 02

    Lockout tagout

    Learn the lockout tagout control system through protective functions, verification questions and a changed-condition practice scenario.

    Explore the hazard →
  3. Critical 8 / 03

    Working at height

    Learn the working at height control system through protective functions, verification questions and a changed-condition practice scenario.

    Explore the hazard →
  4. Critical 8 / 04

    Confined spaces

    Learn the confined spaces control system through protective functions, verification questions and a changed-condition practice scenario.

    Explore the hazard →
  5. Critical 8 / 05

    Electrical safety

    Learn the electrical safety control system through protective functions, verification questions and a changed-condition practice scenario.

    Explore the hazard →
  6. Critical 8 / 06

    Contractor controls

    Learn the contractor controls control system through protective functions, verification questions and a changed-condition practice scenario.

    Explore the hazard →
  7. Critical 8 / 07

    Machine guarding

    Learn the machine guarding control system through protective functions, verification questions and a changed-condition practice scenario.

    Explore the hazard →
  8. Critical 8 / 08

    Gas safety

    Learn the gas safety control system through protective functions, verification questions and a changed-condition practice scenario.

    Explore the hazard →

What you will take awayPut critical controls in place. Check that the protection works before and during exposure.

01 / Put the idea to work

Use the Critical 8 as an organizing system

The eight topics are mobile equipment, lockout tagout, working at height, confined spaces, electrical safety, contractor controls, machine guarding and gas safety. They organize ownership and teaching rather than limit hazard discovery. Rail movement, lifting, pressure, stored energy, fire and simultaneous work cross these boundaries.

Identify the unwanted event and the protective functions needed for the actual task. Not every document or activity is itself a critical control. Training, maintenance and supervision can support a control; show specifically how they sustain its performance.

02 / Put the idea to work

Make the control testable

For each selected control, state the required performance, operating limits, dependencies and signs of deterioration. Assign an accountable owner and define competent implementation and verification roles. The accepted criteria and safe checking method must be specific enough to distinguish working, failed and unknown conditions.

Swipe or scroll across the diagram →

Close the control assurance loopDefine the control, performance standard and owner. Implement it, verify effectiveness before and during exposure, and respond to gaps. Use findings to improve the control and the work system. 01 / Define + ownerSet the performance standard.02 / ImplementPut the protection in place.03 / VerifyCheck before / during exposure.04 / Respond / improveClose gaps; improve the system.Record evidence. Escalate failures. Improve the standard.
Define the control, performance standard and owner. Implement it, verify effectiveness before and during exposure, and respond to gaps. Use findings to improve the control and the work system.
Make the control testable
Control-card fieldQuestion it answers
Protective functionWhat unwanted event or consequence does this address?
Performance and scopeWhat must the control do, for which asset and conditions?
VerificationWhat evidence is required, by whom and at which trigger?
Failure responseWhat work stops and who resolves the gap?
Change and reviewWhat changes require reassessment and renewed acceptance?
03 / Put the idea to work

Separate completion, implementation and effectiveness

A training attendance record shows attendance. An installation record shows work was recorded as complete. Neither alone proves that the protective function meets its requirements. Examine the actual accepted evidence and observe whether protection remains effective in use.

Task-level verification occurs before and during the relevant work. Owner checks examine performance and deterioration over time. Independent assurance challenges the quality of the system and its evidence. Their timing, competence and independence should fit the control; more signatures do not automatically add assurance.

04 / Put the idea to work

Practise: a closed action with an unresolved guard

An action register says a guard repair is complete, but the required function-test evidence is absent. The weekly dashboard is green. Should the team treat the machine as ready?

Feedback: no dashboard color or completion percentage fills the evidence gap. Retain the relevant restriction and have the control owner establish the actual condition using the approved safe method. Record missing evidence as Unknown rather than silently treating it as satisfactory.

Changed condition: the function is verified, but the defect recurs on the next shift. Reopen the issue, protect the affected work and investigate design, maintenance and use. Effective closure needs evidence that the remedy addresses the cause and remains effective, not merely a revised due date.

Learning material for team discussion. Apply your site’s approved procedures, competent-person assessments and applicable requirements to actual work.

Prepare the team conversation

Take this learning to the team

Choose the language and format for your session. Review drafts with your safety and operations leads before adapting them to local work. A download is learning material, not authorization to perform a hazardous task.

English resources

Browse all resources and language editions →

Check the original source

Sources & further reading

Use the original source to check its scope, terminology and current requirements.

← Back to all OPEX training