Understand the exposure
Consider the space configuration, atmosphere, connected energy and material, entry/exit limitations, nearby work and the possibility of conditions changing. Cleaning, coating, temporary hoses and adjacent processes can alter the assessment. Classification and entry decisions belong to competent local authorities using the applicable requirements.
Design and establish protection
Ask whether the task can be performed without entry. If entry is necessary, use the accepted entry system, including control of connections, required monitoring, communication, attendants and rescue arrangements. Requirements depend on the actual space and task; a generic teaching page cannot define acceptable atmospheric limits or an entry method.
Verify before and during work
The control owner translates these teaching prompts into asset-specific performance requirements and a safe checking method. Record the actual evidence, its scope and the responsible role. Missing evidence remains Unknown; a required control that fails or cannot be verified creates a STOP condition for dependent exposure.
- Assessment includes actual task, space and connected/adjacent systems.
- Required entry controls and monitoring have valid evidence.
- Communication, attendance and rescue capability match the approved plan.
Practise a decision
An entry check was completed earlier, but adjacent work has changed and a new hose now crosses the area. What should the team do with the earlier result?
Feedback: Do not treat the previous check as proof of unchanged conditions. Keep the affected entry restricted and have the competent owner reassess the new interface and required controls. Verify the accepted conditions before any release.
Changed condition: The technical conditions are addressed, but the planned rescue team is unavailable on this shift. The missing required capability keeps the affected work stopped. Calling someone after a problem occurs is not evidence of an established rescue arrangement.
Support the people doing the work
Routine labels such as “new tank” can encourage an assumption that a space is harmless. Use the pre-job dialogue to make uncertainty visible. No one should enter to investigate an unknown condition or attempt an improvised rescue.
Transfer the learning
Choose one relevant task and explain the hazard, protective function, evidence needed and condition that would stop the work. Then identify who can resolve a gap and what must be rebriefed before designated restart. Use an approved classroom or tabletop example; do not create a hazardous condition for assessment.
This topic is educational guidance, not an approved equipment procedure or a competence certificate. C8-04 is the stable program identifier. Local technical acceptance, emergency capability and understood instructions remain prerequisites for actual work.
Learning material for team discussion. Apply your site’s approved procedures, competent-person assessments and applicable requirements to actual work.
Take this learning to the team
Choose the language and format for your session. Review drafts with your safety and operations leads before adapting them to local work. A download is learning material, not authorization to perform a hazardous task.
English resources
- Learner practice workbook (DOCX, 11 KB) ↓Teaching and local review edition · v1.0
- Critical 8 one-page recaps (PDF, 732 KB) ↓Design and review draft · v0.13
- Critical 8 teaching slides (PPTX, 3.9 MB) ↓Design and review draft · v0.13
Sources & further reading
Use the original source to check its scope, terminology and current requirements.
